Eufaula, AL- Within the last month, there have been two fatalities in Tyson factories within the United States. A worker died on March 2nd at a Keystone Foods chicken processing plant in Eufaula, AL while cleaning a piece of equipment.
Barbour County Coroner Chip Chapman said in the report that 39-year-old contractor Carlos Lynn became “caught in a pinch-point of the equipment,” and that the cause of death was a decapitation. The official told the broadcaster that the equipment involved in the incident was a chiller.
Tyson Foods, the owner of the plant, told WRBL that operations halted at the facility the day following the industrial accident.
“We’re investigating an accident at our Eufaula, AL facility yesterday that involved a worker employed by an outside contractor and will provide more information when we can,” Tyson Foods said in a statement printed by the station. “We’re grateful for the swift response and assistance of local emergency personnel.”
Another worker died in a Tyson plant March 23rd in Garden City, Kansas.
Deputies responded to the plant for a man not breathing. EMS transported the man, identified as 30-year-old Kendrick Gregory of Garden City, to the hospital where he died.
The Finney County Sheriff’s Office said their initial investigation showed that Gregory was doing maintenance on the harvest assembly line when he was pulled up by harness against a takeaway belt. Another co-worker was able to cut him free.
These two fatalities in Tyson factories could have potentially been prevented with proper and secure Lockout Tagout procedures. Lockout Tagout isolates and locks each energy source for a given piece of equipment, helping to prevent the startup of machinery or equipment that may result in injuring a worker.
Wilsonville, OR- A worker was killed in what authorities say appears to be a workplace accident at the Swire Coca-Cola facility in Wilsonville.
The Clackamas County Sheriff’s Office said a loaded pallet fell on the man and he was dead when first responders arrived. The incident happened between 5 p.m. and 6 p.m., according to Tualatin Valley Fire & Rescue.
The Oregon Occupational Safety and Health Administration has been notified and a medical examiner is investigating. Pallets can lead to injuries such as puncture wounds, sprained ankles, broken toes, or worse. If used for a nonapproved purpose, such as a man lift, the result could be tragic. With roughly 2 billion pallets circulating in the United States, it serves material handlers to take some basic precautionary steps and training to avoid injury. Companies should also make sure a strong Lockout Tagout program has been developed and is established.
Swire Coca-Cola released a statement regarding the incident:
“We are deeply saddened that a fatality occurred at our Wilsonville facility on Friday. We can confirm next of kin have been informed. Our production and warehouse remains closed as we work with the relevant authorities to investigate this tragic incident. We have support available to the family and our employees and we send our deepest sympathies to all those affected.”
The worker who was killed has been identified, authorities said, as Brian Willison, a 47-year-old Hillsboro resident.
Sydney, Australia- A 35-year-old man has lost half his leg in a workplace accident at a factory in New South Wales’ Macarthur region, near Sydney.
Ambulance crews were called to the Inghams Poultry Processing Plant on Ralfe St, Tahmoor, about 8am on Wednesday.
Paramedics worked frantically to free the man, trapped in a machine at the turkey processing facility, and whose leg had to be amputated from the knee.
He was treated at the scene before being flown to Liverpool Hospital in a serious condition.
The ambulance spokesperson said a 35-year-old man was stuck in a piece of machinery, and has sustained a serious leg injury. A specialist medical team arrived by helicopter, where the man was extricated from the scene and flown to hospital for further treatment, in a serious condition.
“Ingham’s has been working with emergency services to do everything it can to support and aid an employee who has been injured in a serious workplace incident. The employee is on his way to hospital and is reported to be in a stable condition,” an Ingham’s spokesperson states.
“The employee’s family is on their way to the hospital and being given all possible assistance and support. Fellow employees are being provided with counselling.”
“Ingham’s will work with the appropriate safety authorities to investigate the incident and will continue to focus on ensuring the safety of its employees.”
Gary, IN- A worker was seriously injured in an industrial accident at Gary Works Wednesday.
The steelworker suffered multiple injuries and was taken to Methodist Hospitals Northlake Campus in downtown Gary. Information on his condition was not immediately available but he is expected to survive.
“We had a worker that got seriously hurt with several injuries but none life-threatening,” United Steelworkers District 7 Director Mike Millsap said. “All I know is he is a maintenance technician and was working on (a blast furnace) and he got hit by something.”
U.S. Steel’s OSHA Recordable Incident Rate has been 0.14 per 200,000 hours so far this year, down from 0.17 in 2017.
Though the United Steelworkers union and steelmakers have worked for years to prioritize workplace safety at the industrial mills, the hulking factories where metal is forged post many inherent hazards that include hot temperatures, catwalks over great heights, and moving equipment that weighs tons. Steelworker ranks as the sixth most deadly job nationally, according to the Bureau of Labor Statistics.
Kentucky, USA- The family of a Kentucky man killed in a workplace incident has filed a lawsuit against his employer, GE Appliances, as well as other parties.
Steve Herring, who has worked for GE Appliances for more than two decades, died in February after being pinned by machinery while working on a refrigerator-building assembly line. News sources are reporting that the state OSHA’s investigation into the workplace incident found that it could have been caused by an inadvertent activation of an improperly positioned gate interlock control.
The lawsuit filed in Jefferson Circuit Court last week names General Electric Company, Design Safety Engineering Inc., Doerfer Corperation, Doerfer Acquisition Company, JR Automation Technologies LLC, Haier US Appliance Solutions Inc. and Kentucky resident Mark Miller as defendants.
The lawsuit claims that the assembly line Herring was working on was “unreasonably dangerous” and in “defective condition.” It alleges that there were no instructions or warnings about the hazards on the line — and that the companies being sued were aware of the defects. The suit requests punitive and compensatory damages.
According to Kentucky OSHA, GE made changes to the safety programming on an assembly line that was identical to the one at which Herring was pinned following a 2014 incident. However, the company didn’t fix the line where Herring worked until after Herring died.
An inspection conducted by the agency after the fatality resulted in GE being cited for seven safety violations and fined $98,000, which the company is appealing.
Arlington, VA- Prompted by reports of three recent fatalities involving electricity, the Mine Safety and Health Administration has issued a safety alert.
Electricity has killed three people in the mining industry since August 7, 2019.
An electrician contacted an energized component of a 4,160 VAC electrical circuit while adjusting the linkage between the disconnect lever and the internal components of the panel that supplied power to the plant feed belt motors. A contract electrician contacted an energized 120 VAC conductor while working inside a fire suppression system’s electrical
panel. An electrician contacted an exposed energized connector while troubleshooting a 995 VAC flooded bed scrubber motor circuit on-board a continuous mining machine.
MSHA offers numerous best practices for electrical incident prevention. Among them:
-Perform lockout/tagout procedures on circuits before working on electrical equipment.
-Don’t rush, and never work alone. Talk with co-workers and confirm your plan is safe.
-Identify and control all hazardous energy sources before conducting tasks, and follow safe work procedures.
-Train miners on equipment they may use.
-Always perform troubleshooting without power. If you must troubleshoot an energized circuit, use appropriately rated personal protective equipment to prevent hazards.
Kansas City, MO- The Occupational Safety and Health Administration (OSHA) has cited a Kansas City-area construction company for multiple violations observed during a May jobsite visit.
According to KSHB, OSHA fined Blue Nile Contractors Inc. $210,037 for failing “to protect employees from trench collapse and electrical hazards.” Inspectors reported four repeat and five serious safety violations during the visit to a site where water lines were being installed.
Blue Nile is a minority-owned wet utility contractor that specializes in trenchless sewer and water construction. The Birmingham, Mo., company was selected as one of the Greater Kansas City Chamber of Commerce’s Top 10 Small Businesses in 2018.
Blue Nile has been placed in the Severe Violator Enforcement Program, KSHB reports. The company has 15 days to comply with OSHA demands or contest the findings.
Proper training and education regarding OSHA violations and accident prevention are is one way for companies to combat these high fines.
Waukegan, IL- An OSHA investigation into the deaths of four employees of an Illinois chemical plant has resulted in more than a million dollars in proposed penalties against AB Specialty Silicones LLC.
The company has been cited for a dozen willful federal safety violations in the explosion and fire at its Waukegan facility on May 3, 2019 that caused deaths of four employees.
The silicon chemical products manufacturer faces $1,591,176 in penalties and has been placed in the in the Severe Violator Enforcement Program.
OSHA investigators determined AB Specialty Silicones failed to ensure that electrical equipment and installations in the production area of the plant complied with OSHA electrical standards, and were approved for hazardous locations. The company also used forklifts powered by liquid propane to transport volatile flammable liquids, and operated these forklifts in areas where employees handled and processed volatile flammable liquids and gases, creating the potential for ignition.
Fort St. John, British Colombia – Peace River Hydro Partners has been fined $662,102.48 by WorkSafeBC. The fine was imposed on August 21, 2019, after a worker sustained an electrical shock injury. A worker was able to access the main circuit breaker in a high-voltage electrical cabinet for tunneling equipment.
According to WorkSafeBC, the main electrical breaker extensions on the exterior cabinet door were not functioning, the de-energization switches had been circumvented and the main breaker switch-box isolation covers were in disrepair.
WorkSafeBC staff also determined that it was a standard work practice at this site to access the main circuit breaker without following lockout procedures.
A stop-use order was issued for the tunneling equipment because Peace River Hydro Partners failed to ensure its equipment was capable of safely performing its functions, and was unable to provide its workers with the information, instruction, training, and supervision necessary to ensure their health and safety.
WorkSafeBC says these were both repeated violations.
This is the largest fine WorkSafeBC can issue under B.C. legislation. The report from WorkSafeBC did not disclose the condition of the worker or the exact date of the incident.
Ontario, Canada- September 19th was Black Thursday in Ontario’s electrical sector with three separate incidents of workers contacting overhead wires causing two electrocution deaths and injuring two others.
The spate of mishaps left construction, electrical and health and safety stakeholders upset, frustrated and searching for answers.
“The Electrical Safety Authority is very saddened to hear any time there are incidents of an electrical nature,” said Dr. Joel Moody, the ESA’s chief public safety officer. “Our thoughts are with the families who have experienced loss.”
Two of the three involved construction work. The third, in Kawartha Lakes, was at a private home where workers trimming a hedge on an elevated work platform contacted a powerline. One worker died and the other was injured.
In Vaughan, a Ministry of Labour report said a worker employed by Pontil Drilling Services sustained fatal injuries when a drill boom made contact with overhead power lines.
In Scarborough, east Toronto, a worker for Darcon was injured when a tower crane hit an overhead powerline. The job site constructor is Paramount Structures.
“This is a stark reminder of the dangers of working near electricity and clearly shows there is a need for more to be done to keep workers safe,” said James Barry, executive chairman of the IBEW Construction Council of Ontario, in an online statement.
There have been 1,250 reported overhead powerline contacts in Ontario in the last 10 years with an average of two deaths per year, making the pair of fatalities on Sept. 19 a full year’s worth statistically. The ESA says construction workers are at especially high risk with 60 per cent of powerline contacts occurring with dump trucks on construction sites.
The ESA responded to the mishaps with a statement urging awareness of the specific hazards related to working near wires. It’s a message that echoes those of the ESA’s Powerline Safety Week awareness campaign that’s launched at the start of construction season each May in Canada.
The ESA also works with utilities, haulers and arborists on a regular basis, Moody said.
“We urge situational awareness with a hazard assessment being the first thing they should do,” he said. “Be aware of your surroundings.”
“All of these incidents are preventable. Electricity is very lethal and unforgiving and having safe work practices every day is very important.”
“For the most part, if you look at the utilities, they live and breathe health and safety,” Kelusky said. “These weren’t utility workers, the guys dealing with the live stuff, they deal with it with great respect and understanding. That is a cultural thing from top to bottom.”
Despite the incidents of Sept. 19, Kelusky said, the statistics show construction is getting safer and that the construction sector in the province is developing a more integrated safety culture.
Responding to the comment urging that more be done, Kelusky said a major focus of his office is linking the diverse efforts of the health and safety community. His office has recently pledged to work with Ontario’s Industrial Health and Safety Association to undertake more research to be able to provide stronger tools to employers.
The approach to falls across the province in the last decade is a good example of how research can lead to program development and working with employers and employees to deliver results, Kelusky explained.
“What we want to do is supply labor and employers with more information other than, if you touch that it will hurt you,” he said, referring to electrical hazards. “We did that with falls and touch wood that seems to be going well.”
Looking ahead, Kelusky said, there are positive signs from Queen’s Park with the auditor general conducting a much-needed review of health and safety programs, the government reviewing the WSIB and signals from the new Minister of Labor, Monte McNaughton, that he is keenly interested in health and safety and working collaboratively with stakeholders. That’s on top of the WSIB’s new Health and Safety Excellence Program and the continuing growth of COR.