Water Facility Cited for Fall Injury

PEWAUKEE, WI – A water facility has been cited for a fall injury in the Milwaukee area. A worker was injured in 2020. A guardrail was loosened. The worker then fell and struck his head on a support beam. The accident occurred in a nearly 30-foot deep water test pit.

The water facility cited for the fall injury is Xylem Inc. In OSHA’s press release they explain the company is being cited for nine violations. Eight of the violations are serious, and one willful. The penalties for these violations total $234,054. Over half that amount is due to the willful violation. That violation is for failure to provide fall protection.

A water treatment facility similar to the water facility cited for a fall injury.

Most the remainder of the penalties are made up by confined space safety violations. Xylem is being cited as failing to follow permit-required procedures before entering the water test pits.

The OSHA Area Director stated, “This worker’s injury could have been prevented if appropriate fall protection was provided.”

Xylem Inc. is a water company specializing in wastewater and energy. Xylem employs over 1,600 workers in the US. 57 of these are at their Pewaukee water facility that is cited for the fall injury.

The company has 15 business days from receipt to comply, request an informal conference with OSHA’s area director, or contest the findings.

Martin Technical provides training in both fall protection and confined spaces safety. These trainings prevent accidents such as this one, and the citations that can follow.

Read More

Spice Importer Cited by OSHA

JACKSON, AL – A Spice importer has been cited by OSHA. iSpice is a global spice importer located in Jackson, Alabama. OSHA reported on April 23rd that they are citing the company $121,511 in penalties.

The workers were found to be exposed to amputations, struck-by, crushed-by and The Spice Importer Cited by OSHA may have avoided citations by using lockout devices similar to this one. electrical hazards. OSHA found iSpice allowed workers to clean the plant’s mixing machines without employing lockout tagout. They employer also failed to implement energy control procedures, train workers on lockout/tagout, and use machine guarding in regards to a rotating portion of the mixer.

Other hazards included allowing workers to use industrial trucks with a damage seatbelt; failing to ensure drivers were competent to operate the equipment; exposing them to electrical hazards by allowing boxes and outlets that were uncovered or lacked faceplates to be used; and a fan with a splice in the cord to be used.

In their press release, OSHA quoted Area Director Jose Gonzalez, “This employer put their employees at serious risk needlessly by failing to provide training and implement well-known protections. These protections are not optional, they are every workers right.”

The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

Martin Technical provides Lockout Tagout services and training to help companies avoid citations such as these and the accidents they can cause.

Read More

Florida Contractor Cited for Fall Hazard Violations

BUNNELL, FL – A Florida contractor was cited for fall hazard violations, totaling over $61k. Fall safety is often the number one cited Safety Violation of the year. OSHA released this announcement on April 7th, 2021.

OSHA stated this citation was part of its Regional Emphasis Program for Fall in Construction. The contractor cited for fall hazard violations, P & S Service Group Inc. has repeat violations for failing to ensure employees use fall protection while working from heights greater than 6 feet. The company was cited for a similar violation in October, 2017. The 2021 violation totals $61,575.  P & S, a framing and and sheathing contractor, has 15 days from receipt of the citations to comply, request an informal conference, or contest the findings before OSHA.

According OSHA’s press release, and BizJournals.com OSHA Area Director Michelle Gonzalez in Jacksonville, Florida stated “This employer has repeatedly disregarded the safety of their employees despite previous OSHA violations. Employers must ensure that workers are protected from these well-known hazards.”

In partnership with PIXO VR, we offer fall protection training through Virtual Reality training.

Read More

OSHA Cites Maine Auto Body Plant for Violations

Waterville, Maine – OSHA has cited a Maine auto body plant for safety violations. These violations total nearly $400k. They are the direct result of an inspection opened Oct. 1st 2020 in response to a complaint.

Shyft Group Duramag LLC, formerly known as F3 MFG Inc., faces $393,992 in proposed fines. These fines are due to not addressing hazards that placed employees at risk, OSHA cited two willful and 10 serious violations.

OSHA Area Director David McGuan in Augusta, Maine, stated “Management’s knowledge of these hazards and their failure to correct them led us to cite these conditions as willful violations.”

As stated in OSHA’s Press Release: OSHA also cited the Maine auto body plant for violations regarding failure to:

  • Guard employees against struck-by and crushing hazards from homemade attachments used on auto lifts and provide adequate training to employees.
  • Guard machinery to prevent employees from coming in contact with machines’ operating parts.
  • Conduct a hazard assessment to determine what personal protective equipment is required for employees and to select appropriate protective equipment for employees.
  • Provide appropriate protective goggles for workers and other persons near a welding area that lacked noncombustible or flameproof screens or shields.
  • Establish and implement a respiratory protection program, medically evaluate employees’ ability to wear respirators, fit-test employees before using respirators, train employees on respirators and adequately maintain and store respirators.
  • Securely anchor machines to prevent them from moving.
    Refrain from using flexible cords and/or cables as a substitute for fixed electrical wiring and adequately guard electrical openings.

Martin Technical offers a variety of training programs and audit and compliance programs to ensure your facility is meeting standards.

Read More

Nitrogen Leak Kills Six, Injures 11 in Poultry Plant Accident

Gainesville, FL – On January 28th a deadly nitrogen leak took the livesAn example photo of industrial liquid nitrogen cannisters of six workers at Foundation Food Group poultry plant located in Gainesville, Florida. The leak occurred during unplanned maintenance on a processing and freezing line. The line was installed about a month prior, according to the U.S. Chemical Safety Board’s report on January 30th.

In addition to the six dead in the nitrogen leak, there were 11 injuries, one more individual was sent to the hospital, and 130 other workers were forced to evacuate. Katherine A. Lemos, CEO & chairwoman of the CSB stated the investigation “…may take up to several years.” New information is still coming forward, and will continue to do so as Lemos suggests.

What We Know Currently

In the CSB’s report from January 30th, it was detailed that there was a release of liquid nitrogen. This rapidly converted to a gas. Because the gas form of liquid nitrogen is heavier than air, it forced the oxygen out the room.

How the liquid nitrogen was released was not detailed. The CSB is currently working to isolate the exact location of release inside the plant. Additional damage to the plant was avoided when a manger turned off an external isolation valve after the leak began.

Other details noted in the report included: Tools were found on the ground near the equipment. The plant receives 2-3 18-wheel truckloads per day of liquid nitrogen. Manufacturers of interior equipment are being looked into, and the supplier of liquid nitrogen was noted in the report.

Going Forward

The CSB lacks the authority to issue fines or criminal charges. However, The Occupational Safety and Health Administration is also investigating the leak. The CSB has noted its investigations will include examinations and evaluations of multiple factors. The will include training as well as operations and procedures. Martin Technical encourages all industries and professionals to keep all employees up to date on training, as well as safety procedures and operations such as Lockout Tagout. Keep your team informed on all regulations and industry standards to prevent accidents such as these.

Read more coverage from NPR, New York Times, and USA Today

Read More

OSHA Fines Bush Brothers for Death of Worker

Eau Claire, WI –

Bush Brothers and Company in Eau Claire, WI, is facing OSHA citations and fines after the death of one of its employees at an Augusta canning factory in July 2020.

On the day of the accident, it was originally reported by WQOW-18 that Augusta PoliceAn image of the outside of a Bush Brothers factory. Shipping truck loads are in front of the factory and mountains lay in the background. responded to a call to the factory just before 9:30 a.m. on July 27th, where a 58 year old woman had reportedly suffered work related traumatic injuries. Medical measures were taken to save her life, however she was pronounced dead at the scene.

As of January 21st, WQOW-18 has reported that the employee was Mary Falk of Eau Claire, WI. OSHA has investigated the death and filed a “serious” class citation against the company, which carries a fine of $12,145. Bush Brothers is accused of failing to store material so that it remains stable against sliding and/or collapse, which falls under Standard 1910.176(b) – Handling materials – general.

At Martin Technical, we encourage safety training in all standards relevant to your work place to prevent accidents such as these.

Read More

Explosion leaves one dead, one injured in Lincoln, CA

Lincoln, CA- One man was killed and another worker was injured at the Sierra Pacific Industries location in downtown Lincoln on the afternoon of Sept. 18, 2020. Sierra Pacific Industries is the second-largest lumber producer in the United States.

The two were working on an commercial-sized air compressor at the industrial plant when it allegedly exploded.

This accident is currently under a California Division of Occupational Safety and Health (CAL/OSHA) investigation, and it is believed that the company will have a better understanding of what took place which caused the accident and death once the investigation is finished.

“Lincoln Police personnel interviewed witnesses and documented the scene, and will turn everything over to Cal OSHA investigators,” Public Safety Chief Doug Lee was quoted saying.

Milo Fryer Jr., 34, of Lincoln,  was named as the man who lost his life because of this accident. The other worker was not identified in the local news reports but was released from the hospital.

Mechanical and machine safety and training is essential to prevent accidents like these.

Read more details from our source, NewsOpi.

Image credit to Core Materials Distribution.

Read More

Produce Company Fined in Worker Death

McAllen, TX- The Occupational Safety and Health Administration (OSHA) has fined  $6,148 against Plateros Produce for the November poisoning death of a 32-year-old worker.

The worker, Luis Reymundo Pierda Martinez, passed away on Nov. 18 possibly due to the inhalation of aluminum phosphate and pesticide vapors, according to OSHA. The exact cause of Martinez’ death is pending toxicology tests.

The incident is reported saying the man was placing aluminum phosphate tablets and pesticide fumigators throughout the warehouse on Nov. 18. He then went to sleep at the warehouse and employees returning on Monday found him dead in the office.

The federal agency issued the two fines on May 14. OHSA fined Plateros Produce $4,048 for an initial penalty and $2,100 for a current penalty, according to the agency’s records. That being said, OSHA still categorizes this as pending, and is not closed.

Our thoughts are with Martinez’s family and loved ones. Tragic incidents like this remind us of the importance of education, training, and preventative safety measures companies and warehouses must take to save lives.osha produce fine

Read more from original source.

Read More

Workers Avoid Injury in Maine Paper Mill Explosion

Jay, ME- Malfunctioning machinery sent wood fiber and other debris shooting into the sky after a massive explosion at a paper mill in Jay, Maine, Wednesday afternoon, officials said.

All employees at the mill have since been accounted for and no injuries were reported.

At 12:06 p.m., Jay police and fire officials received reports of an explosion at a paper factory operated by Pixelle Specialty Paper Solutions at 300 Riley Rd., Davis said. Pixelle spokeswoman Roxie Lassetter said a rupture in the pressure valve of a digester, which creates pulp from wood chips to be used in the paper, caused the explosion.

Lassetter said none of the 165 employees who were inside the building were near the explosion. Some employees and people close to the plant were treated at the scene for minor respiratory issues from the debris in the air, but no one was taken to the hospital, she said.

Lassetter said the blast sent water, wood fiber, and chemicals used during the pulping process into the air during the blast. Environmental officials from the state will assess the area for any hazards, she said.

Pixelle has yet to determine the extent of the damage. Fire officials and representatives from the company will start to assess the site Thursday morning, though Lassetter said the area of the blast has sustained “significant damage.”

Read more from the original source

Read More

OSHA fines Company 150k after Employee Amputation

Lawrence Township, NJ- BWay Corp.—doing business as Mauser Packaging Solutions—received a citation from the U.S. Department of Labor’s Occupational Safety and Health Administration for workplace safety and health hazards after an employee suffered an amputation on Sept. 26, 2019, at its Lawrence Township facility. The company now faces $151,329 in penalties.

OSHA inspected the facility after being notified that an employee was cleaning a machine when the amputation occurred. The agency cited BWay Corp. for failing to use lockout/tagout procedures to protect employees from hazardous energy. OSHA cited the company for similar violations at multiple facilities between 2016 and 2019.

“Workers servicing or maintaining machines are at risk of serious injury, including amputations, if hazardous energy is not properly controlled,” OSHA Marlton Area Office Director Paula Dixon-Roderick said in the statement. “This company must correct the hazards identified to protect workers’ safety.”

The company had 15 business days from receipt of the citations and penalties to comply, request an informal conference with OSHA’s Area Director or contest the findings before the independent Occupational Safety and Health Review Commission.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to help ensure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. 

OSHA fines NJ Company 150k after Employee Amputation

Read more from the original source.

Read More