Water Facility Cited for Fall Injury

PEWAUKEE, WI – A water facility has been cited for a fall injury in the Milwaukee area. A worker was injured in 2020. A guardrail was loosened. The worker then fell and struck his head on a support beam. The accident occurred in a nearly 30-foot deep water test pit.

The water facility cited for the fall injury is Xylem Inc. In OSHA’s press release they explain the company is being cited for nine violations. Eight of the violations are serious, and one willful. The penalties for these violations total $234,054. Over half that amount is due to the willful violation. That violation is for failure to provide fall protection.

A water treatment facility similar to the water facility cited for a fall injury.

Most the remainder of the penalties are made up by confined space safety violations. Xylem is being cited as failing to follow permit-required procedures before entering the water test pits.

The OSHA Area Director stated, “This worker’s injury could have been prevented if appropriate fall protection was provided.”

Xylem Inc. is a water company specializing in wastewater and energy. Xylem employs over 1,600 workers in the US. 57 of these are at their Pewaukee water facility that is cited for the fall injury.

The company has 15 business days from receipt to comply, request an informal conference with OSHA’s area director, or contest the findings.

Martin Technical provides training in both fall protection and confined spaces safety. These trainings prevent accidents such as this one, and the citations that can follow.

Read More

Spice Importer Cited by OSHA

JACKSON, AL – A Spice importer has been cited by OSHA. iSpice is a global spice importer located in Jackson, Alabama. OSHA reported on April 23rd that they are citing the company $121,511 in penalties.

The workers were found to be exposed to amputations, struck-by, crushed-by and The Spice Importer Cited by OSHA may have avoided citations by using lockout devices similar to this one. electrical hazards. OSHA found iSpice allowed workers to clean the plant’s mixing machines without employing lockout tagout. They employer also failed to implement energy control procedures, train workers on lockout/tagout, and use machine guarding in regards to a rotating portion of the mixer.

Other hazards included allowing workers to use industrial trucks with a damage seatbelt; failing to ensure drivers were competent to operate the equipment; exposing them to electrical hazards by allowing boxes and outlets that were uncovered or lacked faceplates to be used; and a fan with a splice in the cord to be used.

In their press release, OSHA quoted Area Director Jose Gonzalez, “This employer put their employees at serious risk needlessly by failing to provide training and implement well-known protections. These protections are not optional, they are every workers right.”

The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.

Martin Technical provides Lockout Tagout services and training to help companies avoid citations such as these and the accidents they can cause.

Read More

Nitrogen Leak Kills Six, Injures 11 in Poultry Plant Accident

Gainesville, FL – On January 28th a deadly nitrogen leak took the livesAn example photo of industrial liquid nitrogen cannisters of six workers at Foundation Food Group poultry plant located in Gainesville, Florida. The leak occurred during unplanned maintenance on a processing and freezing line. The line was installed about a month prior, according to the U.S. Chemical Safety Board’s report on January 30th.

In addition to the six dead in the nitrogen leak, there were 11 injuries, one more individual was sent to the hospital, and 130 other workers were forced to evacuate. Katherine A. Lemos, CEO & chairwoman of the CSB stated the investigation “…may take up to several years.” New information is still coming forward, and will continue to do so as Lemos suggests.

What We Know Currently

In the CSB’s report from January 30th, it was detailed that there was a release of liquid nitrogen. This rapidly converted to a gas. Because the gas form of liquid nitrogen is heavier than air, it forced the oxygen out the room.

How the liquid nitrogen was released was not detailed. The CSB is currently working to isolate the exact location of release inside the plant. Additional damage to the plant was avoided when a manger turned off an external isolation valve after the leak began.

Other details noted in the report included: Tools were found on the ground near the equipment. The plant receives 2-3 18-wheel truckloads per day of liquid nitrogen. Manufacturers of interior equipment are being looked into, and the supplier of liquid nitrogen was noted in the report.

Going Forward

The CSB lacks the authority to issue fines or criminal charges. However, The Occupational Safety and Health Administration is also investigating the leak. The CSB has noted its investigations will include examinations and evaluations of multiple factors. The will include training as well as operations and procedures. Martin Technical encourages all industries and professionals to keep all employees up to date on training, as well as safety procedures and operations such as Lockout Tagout. Keep your team informed on all regulations and industry standards to prevent accidents such as these.

Read more coverage from NPR, New York Times, and USA Today

Read More

Three Story Fall Kills Plant Worker, Injures One More

Commerce, GA- A construction worker at the SK Battery plant in Jackson County, Georgia was declared dead after he sustained injuries from a three story fall.

The accident itself took place November 4, 2020 at the plant’s Formation Building. Reportedly the worker fell through a hole in an air vent 46 feet above the ground, later landing on top of a female worker standing below who also sustained injuries.

Jackson County deputy coroner, Jeff Rogers, said the 34-year-old Augusta man suffered brain injuries and was kept on life support until this weekend. The female worker remains in critical condition but is ultimately expected to survive.

Some workers have told reporters at FOX 5 they worry sub-contractors are sacrificing safety for speed. “You take chances in our trade and you wind up dead,” warned Randy Gregory when FOX 5 Atlanta talked to him in September.

This month’s accident follows other recent injuries at the site. Recently, one worker was hospitalized after he fell through a ceiling, while another allegedly fell through a roof. Fall Protection Training actively addresses the factors that lead to such incidents like these three occurring.

Deputy coroner Rogers said the investigation by OSHA will determine whether the man who died followed safety procedures and at what fault the subcontractors and company will be held at.

“They’re going back out to the site,” explained the deputy coroner. “They’re interviewing witnesses, employees that were there that saw the accident.”

Originally sourced from Fox 5 Atlanta.

Image from claycorp.com

Read More

Plant Worker Crushed Under 25,000 Pound Mold

Bruce Township, MI- A plant worker died last Tuesday at a factory after a 25,000-pound manufacturing mold fell on top of him. The factory, about 40 miles north of Detroit, is part of Romeo Rim Inc, which creates custom injection molding services, and had recently celebrated a year without any safety incident.

Deputies and the Bruce Township Fire Department found the man, identified as 42-year-old Davi Spano, underneath the equipment that had fallen from one of the interior plant walls. 

“At this time, this incident appears to be a tragic accident,” the sheriff’s office was quoted as saying. The accident was responded to just before 10am, and no other workers were reported to be injured.

The Michigan Occupational Safety and Health Administration (MIOSHA) was contacted following the incident, authorities said. Martin Technical reiterates the need for on-site training and courses to prevent such incidents from occurring. 

Originally sourced from ABC News.

Read More

Explosion at Sugar Factory Injures 4 Workers

Nampa, ID- The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) is currently investigating an explosion that occurred last month at Amalgamated Sugar as an open case. 

Jessica Anderson, an Amalgamated Sugar spokeswoman, stated that the explosion occurred in the morning in a sugar beet pulp steam dryer. The cause of the explosion remains unidentified, and the damage reported to the factory is regarded as minimal. 

Anderson said that none of the injuries were life-threatening; four were treated with first aid, one worker, William McMilian, was taken to a local hospital for injuries and further examination. McMillian suffered second degree burns on his head and on his back, as well as third degree burns on his arm that possibly will require a skin graft. 

The employees were wearing appropriate fire protection gear, according to Anderson, though McMillian said that the protective gear did not stop the injuries from occurring.

“We are still investigating the situation, and will release more details as they become available,” Anderson told the Idaho Press.

This is not the first accident occurring at Amalgamated Sugar’s Nampa facility; over the past 35 years, four people have died at the factory. The most recent death happened in 2009 with the death of worker Mario Munoz, 45, whose body was discovered in an auger. The company ultimately paid $18,900 in fines in an OSHA settlement in the case of this 2009 death. 

Sourced from KTVB and IdahoPress

Read More

OSHA Fines AL Hardwood Business after Worker Death

OSHA worker deathSelma, AL- Miller & Co. Inc. is facing $218,192 in OSHA penalties for failing to protect their employees from struck-by hazards and improper machine guarding after a worker was injured, resulting in their death.

Founded in 1923, Miller & Co. Inc. is an Alabama-based hardwood business producing lumber and flooring. A piece of wood fatally struck a worker who was attempting to clear a jammed machine, which then prompted an investigation.

OSHA cited Miller & Co. Inc. for failing to lockout equipment prior to beginning maintenance, ensuring machines were properly guarded and training employees on lockout/tagout procedures. Specifically, OSHA cited Miller & Co. Inc. with the following two citations: Willful – 29 CFR 1910.147 (c)(4)(i) and Serious – 29 CFR 1910.147 (c)(7)(i).

Jose Gonzalez, Mobile, Ala. area director, said in a statement, “Employers are required to identify safety hazards, implement safety measures and train workers on the proper use of safety equipment. Tragedies such as this can be prevented if employers comply with workplace standards, as required by law.”

Martin Technical extends our sympathy towards the family and circle of the worker that lost his life to this accident. Reflecting on the statement above,  tragedies can and should be prevented- which is why our mission to improve workforce safety is driven by people who care about the greater good.

Read more from original source.

Read More

OSHA Fines over 500k in Texas Explosion

The Occupational Safety and Health Administration (OSHA) has fined the TPC group $514,692 for willful violations linked to the explosions and fire November 27 at the Port Neches, Texas plant.

An investigation found that the cause of explosions and fires was from the formation of a vapor at the base of a butadiene finishing tower which then ignited. The initial blast and then fires injured three workers and caused widespread damage to the surrounding community and civilians. The blast prompted evacuations that impacted near 50,000 people in the surrounding communities.

The Occupational Safety and Health Administration said in a statement that it cited TPC for three willful violations by not developing and implementing procedures for emergency shutdown and not inspecting and testing process vessel and piping components. Because of these willful violations, TPC faces $514,692 in civil OSHA fines.

Read more from original source.

Read More

Electrocution Death in NY Aluminum Factory

Scriba, NY — Peter Clark Jr., 54, of Tully, who died while working at the Novelis Inc. aluminum factory in Oswego County on the morning of May 15th, appears to have been accidentally electrocuted, according to local deputies.

He was pronounced dead at the scene after being electrocuted while working as a contractor at the Scriba factory, said the Oswego County Sheriff’s Office.  The deadly accident is being investigated by OSHA (Occupational Safety and Health Administration), Ridley Electric, and the Novelis plant all together, as parts of the accident remain unclear and risks and causes are not yet publicized.

The Novelis plant in Oswego County is the county’s largest manufacturer and employs over 1,100 people. Within the 1.7-million-square-foot facility, workers make rolled aluminum that is used in vehicle body panels for automakers like Ford.

While details of the aluminum factory accident remain unclear, electrocution can be caused by a number of risks and inefficiencies.

Read more from original source.

Read More

Seven Years Later: The Rana Plaza Factory Collapse

Savar Upazila, Bangladesh- In 2013 of this week, the Rana Plaza factory complex in Bangladesh collapsed, killing more than 1,100 garment workers, primarily young women, and injuring 2,500 others.

It was the largest industrial accident since 1984, when a gas leak at a factory in Bhopal, India, killed more than 3,500 people and exposed thousands more to toxic fumes. 

Images of the Rana Plaza collapse caught the world’s attention and became a catalyst for corporate action on factory safety.  

This led over 220 international brands to sign the Accord on Fire and Building Safety in Bangladesh, a unique binding agreement that set up a monitoring and remediation system in the factories where the mostly European brands sourced from. Other brands, primarily from North America, joined the Alliance for Bangladesh Worker Safety.

Today, more of those buyers recognize that factory safety is important and that they will be held to account, and are being more transparent about publicly listing where they source their products. 

Factories covered by the Accord and the Alliance are safer in part because they underwent a series of inspections, had plans to fix the problems identified, and those that didn’t comply were not allowed to work with member companies.

During those inspections, a litany of problems were identified. These included structural flaws, blocked fire exits, and a lack of fire doors and proper fire alarm and sprinkler systems. About 84 percent of those problems at Accord factories have been addressed, and 90 percent of issues at Alliance factories have been remediated. The Accord terminated 96 of its roughly 800 suppliers, and the Alliance 168 of its roughly 2,000. Millions of workers have been trained on safety procedures and safety committees have been formed at many factories.

We do our part in furthering training, education, and prevention of such tragedies.

Read more from original source.

Read More