CANTON, OH – The US Department of Labor’s Occupational Health and Safety Association (OSHA) responded to a complaint of unsafe working conditions at Republic Steel in Canton Ohio. Inspectors found the automative steel mill failed to install adequate machine guarding, implement lockout/tagout measures, or train workers on safety procedures. These violations exposed workers to amputation hazards. As a result, OSHA has placed the steel mill in its Severe Violator Enforcement Program.
Additionally, OSHA has proposed $220,399 in penalties. These penalties are accounted for by one repeat, seven serious, and three other-than-serious safety violations. The company was also cited for similar hazards in 2017.
In their press release, OSHA Area Director Howard Eberts stated, “To avoid amputations and other severe injuries, employers must install safety guards on machines and train workers on how to control hazardous energy and avoid coming in contact with operating machine parts. Republic Steel is well aware of their responsibility to ensure safety procedures are followed, yet once again, they’ve failed to do so.”
According to their website, Republic Steel, the company placed in the Severe Violator Enforcement Program, provides steel bar products for automakers, as well as coils, rods, and wires. They are based in Canton, OHIO, and a subsidiary of Grupo Simec of Guadalajara Mexico.
The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.
Fostoria, OH – The amputations and injuries that resulted from inadequate lockout tagout procedures and practices at a northwestern Ohio vinyl tile manufacturer have now also resulted in over half a million dollars in fines for federal safety violations.
Nox Corporation has been cited for five “willful” and two “serious” violations related to inadequate lockout tagout procedures. OSHA issued Nox $514,236 in fines on Dec 21, 2017 and has placed the corporation on its Severe Violator Enforcement Program.
An investigation into the South Korean vinyl tile manufacturer was triggered by two incidents in 2017 and led to the discovery of eight machine safety violations. One employee required surgery after a tile machine crushed his hand, and shortly afterward, an employee suffered partial amputations of two fingers while working on a recycle material system.
OSHA cited Nox Corp for failing to use adequate lockout/tagout procedures and devices to prevent unintentional machine movement, failure to train employees, and exposing employees to fall hazards. Nox has been placed in OSHA’s Severe Violator Enforcement Program.
In a statement from OSHA’s Toledo office, the area director stated that “when dangerous machines are not properly guarded or de-energized, employees face an increased risk of serious injuries…Employers must monitor their facilities continuously to ensure workplace safety and health procedures are adequate and effective.”
Arcadia, WI – The U.S. Department of Labor’s Occupational Safety and Health Administration levied a historic $1.766 million dollar fine this week against Ashley Furniture Industries, based in Wisconsin. Investigators documented numerous and repeated serious violations at the facility, landing Ashley Furniture on OSHA’s Severe Violator Enforcement Program list for “employers who have demonstrated indifference to their OSH Act obligations by willful, repeated, or failure-to-abate violations.”
The plant employs 4,500 and in the past 3 years has seen over 1,000 worker injuries. Workers were not adequately protected against moving machinery, most of it woodworking machinery. Lack of training and accidents with tools, blades, and saws have resulted in multiple amputations. The OSHA report and $1.76 million dollar penalty allege that Ashley Furniture “failed to safeguard against woodworking machines unintentionally starting when workers were making tool and blade changes,” which is also known as lockout tagout or control of hazardous energy.
Additional citations were issued for “not training workers on safety procedures and hazards present when servicing machinery; lacking adequate drenching facilities for workers exposed to corrosive materials; electrical safety violations; and not equipping all machines with easily-accessible emergency stop buttons.” OSHA categorizes these violations as serious since physical harm resulted from a hazard they estimate that the “employer knew or should have known [to] exist.”
“We rarely issue a fine that is more than $1 million,” commented U.S. Labor Department Assistant Secretary David Michaels. “Having 1,000 work injuries in three years is proof positive that safety in this plant needs tremendous improvement.” U.S. Secretary of Labor Thomas E. Perez stated: “Safety and profits are not an ‘either, or’ proposition. Successful companies across this nation have both.” For its part, Ashley Furniture denies the findings, stressing that they are allegations only.