Rapid City, SD – The Occupational Safety and Health Administration (OSHA) has opened an investigation into a Rapid City trench collapse that trapped two workers, including one who died last Monday afternoon. OSHA is still confirming information of the identity of the workers as well as the company.
The incident occurred in the driveway of an unoccupied home in an area building up new homes and apartments.
The accident was reported just before 4 p.m., after a police officer and medic responded and found the two men trapped in a large dirt pile in a trench that was 15 feet long, six feet wide, and five feet deep.
First responders were able to rescue the man submerged up to his chest, but the other man was buried, where it took nearly five hours before recovering the body around 8:45 p.m.
Trenching, or creating a narrow excavation, is a dangerous activity if not done properly, according to OSHA’s Trenching and Excavation Safety publication. Cave-ins or collapses are the greatest risk and can be fatal since one cubic yard of soil can weigh as much as a car.
Cleveland, OH- The Occupational Safety and Health Administration (OSHA) has proposed $1.57 million in fines against an Ohio company after an accident that claimed the lives of two workers in February 2020. These two deaths prompted an on-site inspection on behalf of OSHA, and a letter from OSHA outlining the violations and fines was released August 2020.
The company in question is Great Lakes Tank and Vessel L.L.C., which specializes in cleaning large storage tanks such as chemical and gas. The proposed charges are the 5th-highest the Occupational Safety and Health Administration has issued since January of 2015.
With such a sum of over $1.5 million, the breakdown of individual charges and citations proposed by OSHA and served to the company can be found here. Among the many fines, one included was a fine for not evaluating the effectiveness of respirators after an Tattempt had been made to repair them using tape following chemical exposure.
Martin Technical reiterates our commitment to safety, education, and training that prevents these tragedies in the workplace.
Wilsonville, OR- A worker was killed in what authorities say appears to be a workplace accident at the Swire Coca-Cola facility in Wilsonville.
The Clackamas County Sheriff’s Office said a loaded pallet fell on the man and he was dead when first responders arrived. The incident happened between 5 p.m. and 6 p.m., according to Tualatin Valley Fire & Rescue.
The Oregon Occupational Safety and Health Administration has been notified and a medical examiner is investigating. Pallets can lead to injuries such as puncture wounds, sprained ankles, broken toes, or worse. If used for a nonapproved purpose, such as a man lift, the result could be tragic. With roughly 2 billion pallets circulating in the United States, it serves material handlers to take some basic precautionary steps and training to avoid injury. Companies should also make sure a strong Lockout Tagout program has been developed and is established.
Swire Coca-Cola released a statement regarding the incident:
“We are deeply saddened that a fatality occurred at our Wilsonville facility on Friday. We can confirm next of kin have been informed. Our production and warehouse remains closed as we work with the relevant authorities to investigate this tragic incident. We have support available to the family and our employees and we send our deepest sympathies to all those affected.”
The worker who was killed has been identified, authorities said, as Brian Willison, a 47-year-old Hillsboro resident.
Houston,TX- A massive explosion rocked a northwest Houston neighborhood Friday morning, breaking windows, collapsing ceilings and even knocking houses off their foundations up to two miles away, resulting in two fatalities.
Houston fire officials say the chemical involved in the explosion was propylene.
As a hazardous chemical, propylene is covered by a number of federal environmental and worker safety regulations.
Companies have to file those inventories with the state, its local emergency planning committee and the local fire department.
On its 2015 inventory, Watson Grinding and Manufacturing did not include propylene. It only listed liquefied oxygen.
If a company releases propylene into the air, it is required to report that release in the EPA’s Toxic Release Inventory. Most releases of propylene occur at larger chemical companies. Propylene is used in plastic manufacturing to make polyproplyene which is used in countless household products. It’s also used as a fuel in large and small facilities.
The Occupational Safety and Health Administration considers propylene a hazardous material. There’s a number of worker safety rules that apply to the storage and handling of propylene and other liquefied petroleum gases that are similar to it.
The OSHA regulations related to propylene all likely applied to Watson Grinding and Manufacturing. The company was fined in 2013 for failing to properly control hazardous energy. Propylene would likely be covered by those rules.
According to the company’s website, Watson Grinding and Manufacturing provides machining, grinding, lapping & thermal spray coatings to customers. It claims to specialize in the turning and milling of exotic alloys, hard metals and large parts.
“The quality of our in-house manufacturing processes is assured by our ISO 9001:2008 certification, team of QA/QC certified professionals and our fully equipped in-house Metallurgical Laboratory,” the website states.
At 9:30 am, Houston Fire Department says HazMat crews have secured the 2,000 gallon tank of propylene gas that was leaking at the blast site. There is still reportedly a small fire burning.
According to a news released dated November, 2015, the company is located in more than 84,000 square feet of facilities, and employs more than 125 people.
Buford, GA- A Buford distribution center has received over $190,000 in fines for safety violations that put its employees at risk, the U.S. Department of Labor said.
The $191,895 fine was levied against Mavis Southeast — the company better known as Mavis Discount Tire — on Dec. 23, following a routine inspection by the Occupational Safety and Heath Administration done on Sept. 11. The company did not respond to a request for comment.
Inspectors found some warehouse emergency exits were blocked with items including stacks of tires, putting employees at risk in case of a fire or other instances when an urgent exit would be required. The facility also lacked emergency exit signs in required positions, a repeat offense, the agency said in its citation report. The repeat violations stem from issues first recorded in 2016, the report says.
Employees were seen without required safety equipment while working at elevations up to 25 feet, and multiple industrial storage racks had visible damage, presenting a risk to warehouse workers, the report said. Aisles where workers walk near trucks and other industrial machinery were not properly labeled, risking workers being struck by machinery, the report said. Congested and narrow aisles also presented a danger to forklift operators, according to the report.
Fire extinguishers were not easily accessible and did not undergo required monthly inspections or an annual maintenance check, the report said. Multiple violations regarding a lack of employee safety training were also noted in the report.
The company must respond the citation within 15 business days and include certifications that show the violations have been fixed. Mavis Southeast has the right to contest the citations and fines, but must do so within the 15-day period.
Sydney, Australia- A 30-year-old man was crushed to death at a pallet factory in Sydney’s west, one of three industrial accidents across the city on Wednesday. Ambulance crews were called to a pallet factory at Forrester Road in St Marys about 5:40am, where they found a 30-year-old man with severe head injuries. Paramedics treated the man at the scene but he could not be saved.
As mentioned, this was only one of the multiple recent industrial accidents in this area of Australia this week.
In the city’s east, a man is in a critical condition following a workplace accident at an address in Point Piper. Emergency crews were called to a home on Longworth Avenue about 7:30am, after receiving reports a man had fallen 8 to 10 meters from a scaffolding fall.
In Pyrmont, a worker has been taken to hospital with head injuries after he was struck by falling pipes.
Norwalk, OH – An Ohio manufacturer faces $213,411 in federal safety fines for failures to prevent known safety hazards. Following an industrial accident at their Norwalk (OH) facility, OSHA found American Excelsior failed to develop or implement energy control procedures and also failed to train employees on energy control procedures.
Energy control procedures, such as Lockout/Tagout, are designed to prevent unintentional machine start-up during maintenance. Lockout procedures provide detailed instruction on how to isolate and lock each energy source for a given piece of equipment, helping to prevent the startup of machinery or equipment that may result in worker injury.
In the 2018 accident at American Excelsior, OSHA investigators determined that the employee sustained injuries when a machine resumed operation while he was in the process of removing product build-up in the equipment. The worker suffered a crushed arm and required hospitalization.
According to OSHA’s Toledo Area Office Director, American Excelsior “failed to implement safety procedures to prevent known hazards…This injury could have been avoided if machine locking devices had been installed.”
OSHA’s proposed penalties of $213,411 are for violations and failures found at American Excelsior in the areas of energy control, machine guarding, and employee training.
Training employees on the value of energy control procedures is one of the most crucial pieces of a successful and compliant lockout/tagout program. Employers must provide training to ensure that the purpose and function of the energy control program are understood by employees and that they possess the knowledge and skills required for the safe application, usage, and removal of energy controls.
American Excelsior Company manufactures biodegradable erosion control blankets. They are reported to have received citations for similar violations at their Wisconsin facility in 2017 and have been placed on OSHA’s Severe Violator Enforcement Program.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA sets and enforces the standards that make workplaces safe for American workers. Martin Technical is a leading provider of practical industrial safety and efficiency services. Our experts can help simplify the complex by applying real-world solutions for Lockout Tagout, Arc Flash, Electrical Safety, Risk Assessments, Training, Machine Safety & Safety Consulting Services. Contact a member of our Safety Services & Training Team to discuss how we can help make your workplace better, safer and more efficient.
Natchez, MS – OSHA has cited paper products manufacturer von Drehle Corporation for multiple workplace safety hazards and issued $303,657 in potential penalties, including one for the maximum amount allowed by law.
OSHA’s Area Office Director stated that “employers are required to assess potential hazards, and make necessary corrections to ensure a safe workplace…[This] inspection results demonstrate workplace deficiencies existed, putting workers at serious risk of injury or death.”
Von Drehle Corp issued a statement regarding the citations at their Natchez facility: “Employee safety is the utmost important priority for von Drehle, which is why we fully cooperated with OSHA throughout the inspections.”
Von Drehle is headquartered in Hickory, North Carolina, and manufacturers industrial and commercial paper products like tissue and paper towels at facilities in North Carolina, Mississippi, Nevada and Tennessee.