Santa Ana, CA – Cal/OSHA announced fines of over a quarter of a million dollars against Aardvark Clay & Supplies this week. The fines are the result of Cal/OSHA’s investigation into a 2018 worker death at the facility which has been attributed to willful failure to properly guard equipment and lack of lockout/tagout training.
Enrique Garcia-Vazques (18) died in a workplace accident at the Santa Ana (CA) clay products business on Sept. 20, 2018 when he became fatally entangled in a clay manufacturing machine called a pug mill. According to reports, Garcia-Vazques was packaging clay blocks after they were cut to size when he became caught in the unguarded mixing blades of the machine as he attempted to identify why the clay stopped traveling through the extruder. According to Cal/OSHA’s report, Enrique Vasquez Garcia sustained amputation, puncture and asphyxia-related injuries in the workplace accident.
Cal/OSHA found that machine safety guards had been purposely removed from the industrial mixer and that the worker had not received training on the machine prior to the accident. Local emergency responders tried to free Garcia-Vazques from the equipment, but sadly, in the end he was declared dead at the scene.
According to said Cal/OSHA’s statement,“Pug mills have rotating blades that can cause amputations and fatally injure employees…Employers must ensure all machinery and its parts are properly guarded, and employees are effectively trained to prevent tragic accidents like this.” Aardvark Clay & Supplies uses the industrial pug mills to manufacture and mix clay.
Investigators with California’s Division of Occupational Safety and Health found that all four of the pug mills in Aardvark’s Santa Ana shop had unguarded openings exposing employees to the moving parts. This is in direct violation of safety regulations requiring mixers to have a cover to prevent employees’ hands from entering the machine during operation. This willful failure to guard machinery was cited as one of the willful-serious violations for which Aardvark is being held accountable.
Five violations were levied against Aardvark Clay & Supplies, along with a grand total of $250,160 in proposed penalties. Among the violations, one was categorized as willful-serious accident-related, one was classified as willful-serious, two were deemed serious, and one was general. Accident-related violations are cited when the injury, illness, or fatality is caused by the violation. Serious violations are cited when there is a “realistic possibility” that death or serious harm could result from the hazard created by the violation.
The state of California requires employers to conduct and document inspection of safety hazards as a part of their state-mandated Injury and Illness Prevention Program. Employers whose workplaces feature machines with moving parts, such as mixers, are also required to train their employees in Machine Guarding and Lockout/Tagout in an effort to prevent exactly the type of accident that killed Garcia-Vazques.
Aardvark Clay & Supplies was found to have failed to effectively train workers on the hazards involved with operating their machinery, and then found remiss in identifying and correcting their machine safety hazards. Machine safety guards were provided by equipment manufacturer, but Cal/OSHA found that Aardvark had removed the guards. Investigators documented evidence of fabricated guards having been added to the machines at some point in their operation, but these were found to have been later removed when the employer “believed they interfered with the rate of production.”
For this reason, Cal/OSHA categorized Aardvark’s violation as willful. Willful violations are cited when the employer is aware of the law and still violates it or is aware of a hazardous condition and takes no reasonable steps to address it.