ADRIAN, MO– A local Missouri grain facility has been cited for an injury and explosion from failing to correct critical safety procedures, including potential dust ignition sources at their Adrian grain loading facility.
Due to its negligence, the company suffered a grave explosion that seriously injured an employee and destroyed the main elevator at an Adrian grain loading facility. OSHA cited West Central Agri Services for one willful and six serious safety violations totaling $215,525 in OSHA fines.
The U.S. Department of Labor Occupational Safety and Health Administration determined the explosion could have been avoided if the company set up bucket elevators with monitoring devices that notify workers when a belt is slipping and potentially causing friction – this can ignite grain dust.
Within grain handling facilities, OSHA standards require a storage capacity of over one million bushels, and the company had not updated its dust collection system since its installation in 1974. MFA Enterprises failed to meet safety standards.
The company also did not repair an overhead trolly system used for connecting fall protection devices. The trolly system was out of service at the time of its investigation and noted violations, including a lack of preventive maintenance and a failure to designate hazardous areas existed. The company workers were exposed to fall hazards when walking atop the railcars to open and close the hatches without fall protection which is inconsistent with fall protection training and safety measures.
MFA Enterprises Inc. is one of the region’s oldest agricultural cooperatives and brings together 45,000 farmers in Missouri and adjacent states. Together with working with OSHA’s Grain-Handling Safety Standard focuses on the grain and feed industry’s six significant hazards: engulfment, falls, auger entanglement, “struck by,” combustible dust explosions, and electrocution hazard.
“West Central Agri Services failed to follow industry standards and create company policies for safe grain handling, and needlessly put their workers in danger,” said OSHA Regional Administrator Kimberly Stille in Kansas City, Missouri. “Grain handling hazards can be avoided by using well-known safety measures that are proven to help prevent workers from being injured or killed.”
Gainesville, FL – On January 28th a deadly nitrogen leak took the lives of six workers at Foundation Food Group poultry plant located in Gainesville, Florida. The leak occurred during unplanned maintenance on a processing and freezing line. The line was installed about a month prior, according to the U.S. Chemical Safety Board’s report on January 30th.
In addition to the six dead in the nitrogen leak, there were 11 injuries, one more individual was sent to the hospital, and 130 other workers were forced to evacuate. Katherine A. Lemos, CEO & chairwoman of the CSB stated the investigation “…may take up to several years.” New information is still coming forward, and will continue to do so as Lemos suggests.
What We Know Currently
In the CSB’s report from January 30th, it was detailed that there was a release of liquid nitrogen. This rapidly converted to a gas. Because the gas form of liquid nitrogen is heavier than air, it forced the oxygen out the room.
How the liquid nitrogen was released was not detailed. The CSB is currently working to isolate the exact location of release inside the plant. Additional damage to the plant was avoided when a manger turned off an external isolation valve after the leak began.
Other details noted in the report included: Tools were found on the ground near the equipment. The plant receives 2-3 18-wheel truckloads per day of liquid nitrogen. Manufacturers of interior equipment are being looked into, and the supplier of liquid nitrogen was noted in the report.
The CSB lacks the authority to issue fines or criminal charges. However, The Occupational Safety and Health Administration is also investigating the leak. The CSB has noted its investigations will include examinations and evaluations of multiple factors. The will include training as well as operations and procedures. Martin Technical encourages all industries and professionals to keep all employees up to date on training, as well as safety procedures and operations such as Lockout Tagout. Keep your team informed on all regulations and industry standards to prevent accidents such as these.