Cleveland, OH- The Occupational Safety and Health Administration (OSHA) has proposed $1.57 million in fines against an Ohio company after an accident that claimed the lives of two workers in February 2020. These two deaths prompted an on-site inspection on behalf of OSHA, and a letter from OSHA outlining the violations and fines was released August 2020.
The company in question is Great Lakes Tank and Vessel L.L.C., which specializes in cleaning large storage tanks such as chemical and gas. The proposed charges are the 5th-highest the Occupational Safety and Health Administration has issued since January of 2015.
With such a sum of over $1.5 million, the breakdown of individual charges and citations proposed by OSHA and served to the company can be found here. Among the many fines, one included was a fine for not evaluating the effectiveness of respirators after an Tattempt had been made to repair them using tape following chemical exposure.
Martin Technical reiterates our commitment to safety, education, and training that prevents these tragedies in the workplace.
Houston,TX- A massive explosion rocked a northwest Houston neighborhood Friday morning, breaking windows, collapsing ceilings and even knocking houses off their foundations up to two miles away, resulting in two fatalities.
Houston fire officials say the chemical involved in the explosion was propylene.
As a hazardous chemical, propylene is covered by a number of federal environmental and worker safety regulations.
Companies have to file those inventories with the state, its local emergency planning committee and the local fire department.
On its 2015 inventory, Watson Grinding and Manufacturing did not include propylene. It only listed liquefied oxygen.
If a company releases propylene into the air, it is required to report that release in the EPA’s Toxic Release Inventory. Most releases of propylene occur at larger chemical companies. Propylene is used in plastic manufacturing to make polyproplyene which is used in countless household products. It’s also used as a fuel in large and small facilities.
The Occupational Safety and Health Administration considers propylene a hazardous material. There’s a number of worker safety rules that apply to the storage and handling of propylene and other liquefied petroleum gases that are similar to it.
The OSHA regulations related to propylene all likely applied to Watson Grinding and Manufacturing. The company was fined in 2013 for failing to properly control hazardous energy. Propylene would likely be covered by those rules.
According to the company’s website, Watson Grinding and Manufacturing provides machining, grinding, lapping & thermal spray coatings to customers. It claims to specialize in the turning and milling of exotic alloys, hard metals and large parts.
“The quality of our in-house manufacturing processes is assured by our ISO 9001:2008 certification, team of QA/QC certified professionals and our fully equipped in-house Metallurgical Laboratory,” the website states.
At 9:30 am, Houston Fire Department says HazMat crews have secured the 2,000 gallon tank of propylene gas that was leaking at the blast site. There is still reportedly a small fire burning.
According to a news released dated November, 2015, the company is located in more than 84,000 square feet of facilities, and employs more than 125 people.
North Platte, NE – OSHA issued fines this week to Western Engineering Company Inc for violations found following an employee death. In 2018, a Western Engineering employee suffered fatal injuries after being pulled into an unguarded slat/drag conveyor at the company’s Nebraska asphalt plant.
In a statement, OSHA’s Omaha Area Office Director said that “Employers are required to develop safety and health programs that address known hazards and ensure that safety procedures are followed to prevent tragedies such as this from recurring.”
The confined space violations included failure to develop a confined space entry program; failure to issue safety permits; failure to test atmospheric conditions; and failure to provide air testing and monitoring equipment.
28-year-old Andrew Martinez (of Weslaco, TX) was fatally injured at Western Engineering’s North Platte (NE) facility in November of 2018 when he was pulled into an unguarded slat/drag conveyor on the job. On the day of the event, emergency workers were called to the plant for body recovery. Upon arrival, they discovered the Martinez pinned in the machinery and deceased.
If you have any concerns about safety at your facility, please contact the Industrial Safety Experts at Martin Technical. Martin Technical is a leading provider of practical safety and efficiency services that make industrial plants and facilities better, safer and more efficient. Our experts simplify the complex by offering real-world solutions for Lockout/Tagout, Arc Flash, Electrical Safety, Risk Assessments, Machine Safety, Safety Consulting Services, and Employee Training.