TOCCOA, GA – A recycling plant has been cited in a fatal fall that occurred on December 2020 in Toccoa, GA. OSHA (The Occupational Safety and Health Administration) has cited Scrap Master Inc. after determining they failed to equip stairs and platforms with guardrails to prevent falls, exposing workers to fall hazards.
The inspection also resulted in citations for failures to mount and mark fire extinguishers, repair powered industrial trucks, provide a training program on powered industrial trucks, develop and utilize specific procedures for employees performing service and maintenance activities on machines, and prevent workers from being exposed to occupational noise levels above the allowable time-weighted average.
In total, OSHA cited Scrap Masters with eight serious and five repeat violations, which resulted in a proposed $164,308 in penalties.
OSHA Acting Area Director Michael Hejazi was quoted as saying, “Implementing required safety procedures can mean the difference between a tragic incident and everyone going home safely to their families.”
The recycling plant cited in the fatal fall, Scrap master Inc. recycles plastic automobile gas tanks, according to OSHA’s press release. The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.
After joining Martin Technical as CRO, Gil Truesdale was featured in a Nov. 2020 publication of his Alma Matter’s Magazine: Charleston Southern University Magazine. The article, which you can read here, discusses Truesdale’s journey to finding balance in work and life.
For 10 weeks that crossed 2016 and 2017, Truesdale served as a juror, and foreman of that jury, for a murder trial. He found his prior experiences in leadership served him well throughout the proceedings.
The article explains that after the trial, Truesdale left his previous employment and took a six-month sabbatical. He spent time with his family, and listened to them about his nonstop-work lifestyle. In his role at Martin Technical, he experiences a new balance. He still travels. However, as Truesdale states in the article, he is able to “…stop, breathe, recharge, get spiritually refocused, because the tasks are never going to stop.”
The article also mentions charities and boards Truesdale participates in for the public good. These include THRIVE Saves Lives, a group that combats domestic violence, and The Charleston Forum, which provides a dialogue on race. Truesdale extends his caring attitude to those around him, including in the workplace, “If I see someone going through something, I will definitely ask how they are doing.” A Martin Technical cultural value is our employee’s well-being. We didn’t just hire Gil Truesdale for his vast experience within our industry, we also hired him for his contribution to our internal culture, and are grateful to have him on our team.
MANCHESTER, OH – Two companies were cited in a building collapse that caused the death of two workers. On Dec. 9th, 2020, the Killen Power Generation Station’s building collapsed. Its steel beams fell on and killed two workers employed to demolish the facility. According to OSHA’s press release the employees were a laborer cutting steel and a truck driver preparing to move the scrap metal off-site.
OSHA investigated the project and cited two Michigan companies. The two companies were general contractor Adamo of Detroit, and SCM Engineering Demolition Inc. of East China. Both were cited for multiple violations of the general duty clause and failing to inspect the site regularly for hazards resulting from the demolition process.
The two companies cited in the building collapse have combined proposed penalties of $194,012. Adamo is responsible for $181,724 for a range of violations. SCM Engineering faces penalties of $12,288 for three serious violations.
OSHA determined the companies allowed employees to continue working under hazardous conditions without adding shoring, bracing, or other means to steady the structure. OSHA also determined they failed to train employees on identifying potential hazards.
OSHA Area Director Kenneth Montgomery in Cincinnati was quoted as saying, “Some of the most dangerous construction projects are those that involve demolishing buildings. This tragedy could have been prevented if the employer protected their workers with proper planning, training and appropriate personal protective equipment and by complying with OSHA standards.”
Both companies have 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.
Martin Technical provides safety training to prevent accidents such as these.
COLUMBUS, GA – A Facility has been given 22 serious citations by OSHA. HPPE LLC was given a safety and health inspection at its Columbus chemical manufacturing facility. According to ValdostaToday, the inspection was conducted under OSHA’s Regional Emphasis Program for Powered Industrial Trucks. The inspection has resulted in a proposed $136,816 in penalties.
CATHEDRAL CITY, CA – OSHA has fined contractors for a fatal accident in which a metal gate collapsed and crushed a 41-year-old construction worker. The metal gate weighed 3,000 pounds and was located near the casino’s loading dock.
The accident occurred on December 7th 2020 at Agua Caliente Casino Cathedral City, according to OSHA’s press release. OSHA’s investigation that followed found the project’s contractors failed to conduct inspections to discover hazards, instruct employees on how to recognize workplace dangers, and install caution signs to warn workers about potential hazards. The three contractors, Penta Building Group, No Limit Steel and The Raymond Group, face $64,169 in combined penalties.
OSHA Area Director Derek Engard was quoted as saying “Required oversight and communication related to workplace safety and health could have prevented this tragic loss of life. This case is a painful reminder of why employers must make complying with workplace safety standards a priority.”
MARLTON, NJ – Six contractors were cited for fall safety hazards on a luxury home construction site. OSHA listed the six companies in their press release put out on Monday. Combined, there were 4 willful and 35 serious violations. Most the violations were for failing to provide fall protection or fall protection training. Falls are the leading cause of death in the construction industry. They are also repeatedly the number one most frequently cited violation of the year for OSHA.
The penalties total $244,397. One of the six contractors cited for fall safety, Lifetime Contractor Corp., is responsible for over half of those penalties. OSHA began the inspections as part of its Regional Emphasis Program on Falls in Construction. On October 20th, 2020, a compliance officer observed workers exposed to falls and other hazards. The same was observed during a second inspection the 22nd. This prompted a third inspection on the 31st.
OSHA Area Director Paula Dixon-Roderick was quoted as saying, “A fall can permanently alter or end a worker’s life in a matter of seconds. Contractors and subcontractors in the construction industry have a legal obligation to comply with the law and ensure their workers end their shifts safely. When employers fail to follow requirements, OSHA will hold them responsible to the fullest extent of the law.”
The companies have 15 business days from receipt of their citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings.
Martin Technical, in partnership with PIXO VR, offers Fall Protection Training to help companies avoid fines such as these.
PEWAUKEE, WI – A water facility has been cited for a fall injury in the Milwaukee area. A worker was injured in 2020. A guardrail was loosened. The worker then fell and struck his head on a support beam. The accident occurred in a nearly 30-foot deep water test pit.
The water facility cited for the fall injury is Xylem Inc. In OSHA’s press release they explain the company is being cited for nine violations. Eight of the violations are serious, and one willful. The penalties for these violations total $234,054. Over half that amount is due to the willful violation. That violation is for failure to provide fall protection.
Most the remainder of the penalties are made up by confined space safety violations. Xylem is being cited as failing to follow permit-required procedures before entering the water test pits.
The OSHA Area Director stated, “This worker’s injury could have been prevented if appropriate fall protection was provided.”
Xylem Inc. is a water company specializing in wastewater and energy. Xylem employs over 1,600 workers in the US. 57 of these are at their Pewaukee water facility that is cited for the fall injury.
The company has 15 business days from receipt to comply, request an informal conference with OSHA’s area director, or contest the findings.
“As the leader of our switchgear division, Dave will be responsible to drive expansion, support our customers and partners, and assist in delivering our future growth into new vertical markets,” said Gil Truesdale, CRO of Martin Technical, “With Dave, our expectations have been over delivered. We wanted a subject matter expert, and we got that and so much more. He has already made an impact on our company, and our customers.”
Davequotes “I am very grateful to be part of the Martin Technical Team of industry leading professionals. My goal is to continue and strengthen us as a solutions provider in electrical distribution, safety equipment and training.”
To contact Dave King, please email DaveK@MarTechnical.com or call (864) 430-6876.
About Martin Technical / Safety Hive
Martin Technical is a privately held safety solutions company whose mission is to improve workforce safety by providing reliable and trusted solutions by employees who care about the greater good.We are experts in providing practical safety and efficiency services that make plants and facilities better, safer and more efficient. Martin Technical safety services include engineering, inspection, implementation, consulting and training services. Safety Hive, a wholly owned subsidiary of Martin Technical is a Safety Technology Solution and Software Provider that digitizes and automates safety to help predict and prevent workplace safety incidents through technology and data.
JACKSON, AL – A Spice importer has been cited by OSHA. iSpice is a global spice importer located in Jackson, Alabama. OSHA reported on April 23rd that they are citing the company $121,511 in penalties.
The workers were found to be exposed to amputations, struck-by, crushed-by and electrical hazards. OSHA found iSpice allowed workers to clean the plant’s mixing machines without employing lockout tagout. They employer also failed to implement energy control procedures, train workers on lockout/tagout, and use machine guarding in regards to a rotating portion of the mixer.
Other hazards included allowing workers to use industrial trucks with a damage seatbelt; failing to ensure drivers were competent to operate the equipment; exposing them to electrical hazards by allowing boxes and outlets that were uncovered or lacked faceplates to be used; and a fan with a splice in the cord to be used.
In their press release, OSHA quoted Area Director Jose Gonzalez, “This employer put their employees at serious risk needlessly by failing to provide training and implement well-known protections. These protections are not optional, they are every workers right.”
The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.
Martin Technical provides Lockout Tagout services and training to help companies avoid citations such as these and the accidents they can cause.
CHIPPEWA FALLS, WI – A company has been cited for a workplace death in Chippewa Falls, Wisconsin. Berry Global, a plastic fabrication company, has been issued $40,959 in fines regarding the death of one of its employees due to an accident at their plant.
The accident occurred October 5th 2020. According to local news the 54-year-old man received a laceration to the head when he was struck by a piece of machinery. Police reviewed a video of the incident and determined it was an accident.
As of press time, OSHA’s inspection report for the case cites as all violations Lockout/Tagout. Martin Technical offers Lockout Tagout services to prevent accidents such as these.