YEOSU, South Korea – Sunday, January 10th, 2021, a 33-year-old mechanic for a coal storing company at the national industrial complex in Yeosu died after his body got stuck in a machine used for coal transportation.
According to Yeosu Fire Station, the contract worker was caught in the machine starting around 7:55 p.m. Sunday and was taken out from the machine at 10:32 p.m. by rescuers dispatched to the scene.
The badly injured worker was transported to a nearby hospital in cardiac arrest and ultimately died there around 11:42 p.m. The accident occurred while he was inspecting the machinery with another worker, who was the one that initially reported the emergency to the company.
Police and labor authorities in South Korea are investigating the exact circumstances of the incident and whether there have been any violations of safety guidelines. Machine Safety is essential to stay trained and informed of, even with routine inspections.
In 2018, another worker fell to his death three meters off of a conveyor at the same company.
Hudson, N.C.- Last Tuesday, 12/29/20, at Sealed Air Corp. plant in Hudson, North Carolina, worker Alan Rothenberger was trapped in a machine for 45 minutes.
He was airlifted to a hospital and is currently in a coma due to brain damage caused by lack of air-flow to his brain for 10 minutes after the incident.
The North Carolina Occupational Safety and Health (OSHA) division has begun its investigation into the incident.
“Based on the preliminary information that we have at this time, an employee was threading up a machine when their body was pulled into the machine causing crushing injuries to their torso,” OSHA said in a statement.
The incident is believed to have taken place when rollers did not have a clear stop or release button accessed, potentially being a lockout tagout machine issue or fault. Sealed Air. Corp manufactures bubble wrap and foam.
Winnipeg, Canada – Manitoba Workplace Safety and Health is investigating at Gerdau Long Steel North America after a worker was injured in an accident at the mill in Selkirk on the weekend.
A spokesperson for the steel mill confirmed to press that a worker at the Gerdau Manitoba Steel Mill was injured and is expected to be released in “the next day or two.”
According to the province, the unnamed worker fell approximately eight feet from a stepladder and sustained a “serious leg injury,” and then was airlifted to a nearby hospital.
The incident is now under investigation. The company was issued two improvement orders related to ladders directly relating to this incident.
Improvement orders are issued when a priority contravention is noted; they require measures to be put in place by a specified timeframe in order to ensure the safety and health of workers. Approximately 7,000 improvement orders are issued annually in the province of Manitoba.
Every company has different needs and training requirements, which is why Martin Technical offers blended learning solutions internationally to countries like Canada.
Workplace Safety and Health have been notified of three other serious incidents ranging in injuries at the workplace this year, the spokesperson told the press. Some of these incidents also warranted improvement orders.
Commerce, GA- A construction worker at the SK Battery plant in Jackson County, Georgia was declared dead after he sustained injuries from a three story fall.
The accident itself took place November 4, 2020 at the plant’s Formation Building. Reportedly the worker fell through a hole in an air vent 46 feet above the ground, later landing on top of a female worker standing below who also sustained injuries.
Jackson County deputy coroner, Jeff Rogers, said the 34-year-old Augusta man suffered brain injuries and was kept on life support until this weekend. The female worker remains in critical condition but is ultimately expected to survive.
Some workers have told reporters at FOX 5 they worry sub-contractors are sacrificing safety for speed. “You take chances in our trade and you wind up dead,” warned Randy Gregory when FOX 5 Atlanta talked to him in September.
This month’s accident follows other recent injuries at the site. Recently, one worker was hospitalized after he fell through a ceiling, while another allegedly fell through a roof. Fall Protection Training actively addresses the factors that lead to such incidents like these three occurring.
Deputy coroner Rogers said the investigation by OSHA will determine whether the man who died followed safety procedures and at what fault the subcontractors and company will be held at.
“They’re going back out to the site,” explained the deputy coroner. “They’re interviewing witnesses, employees that were there that saw the accident.”
Fargo, ND – The Occupational Safety and Health Administration (OSHA) has begun investigating Red River Commodities, a Fargo agricultural company, after an employee suffered an injury that resulted in losing his leg.
The worker involved in this incident was Aaron Maves, 31, who had to wait nearly 40 minutes in pain while emergency responders worked to free him.
“I’m really lucky…grain bin auger accidents have a really low survival rate,” Maves said, as reported by Valley News Live.
Maves leg was caught when he sweeping around the auger of a grain bin. He said his colleague’s quick thinking saved his life. Though unexpected accidents happen, grain bin related injuries and death are more preventable with proper training.
Since January 2018, Red River Commodities has roughly paid $25,700 in fines towards OSHA for other incidents, including one incident where an employee unfortunately was killed after being struck by a forklift while they were sweeping. OSHA cited Red River Commodities for at least eight violations committed in 2018.
Glastonbury, CT – An employee at EDAC Technologies had to be rescued after becoming caught in machinery while on the job. The worker was transported via helicopter to receive medical care for serious injuries to his legs as a result of the industrial accident earlier this week.
The injured worker is reported to be a 58-year-old male employed by EDAC Technologies, an aerospace and defense manufacturing facility. According to local police, he became stuck inside an industrial CNC vertical turning center and was seriously injured as a result. It took area firefighters over 30 minutes to extract the worker from the machine, after which he was taken by helicopter to the local hospital for treatment.
Other reports of the accident claim that the worker fell into the industrial lathe machine and “sustained serious injuries to the lower extremities” as a result. At this time, the man’s name and condition have not released and there have been no updates as to the cause of the fall or entrapment that lead to the injury. OSHA has been informed and will be conducting an investigation into the accident.
EDAC Technologies is an aerospace parts company specializing in the manufacture of large diameter, thin-walled cases that are used in aerospace, defense, and turbine industries.